wastegate Posted October 18, 2020 Report Share Posted October 18, 2020 Hi Guys, Do you know if the CAN-MPX translator Zac designed on the TALT+ has the Cruise Light programmed into the logic? So we could add cruise light to the CAN2 Transmit Frame? Looks like Cruise Control Light on the combo meter is at 0xD2 Byte0 Bit1 on the MPX. Kinda hoping Zac programmed it already in there and it has a CAN address reserved. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 18, 2020 Report Share Posted October 18, 2020 This project was a bit before my time but from what I can see our car didnt have cruise. The only data we send in D2 is the snow light output. So you can possibly use that for your cruise light. Quote Link to comment Share on other sites More sharing options...
wastegate Posted October 19, 2020 Author Report Share Posted October 19, 2020 Thanks Adam! Might just do this cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.