Dandeman Posted November 7, 2020 Report Share Posted November 7, 2020 Knock Control -- I would like to have knock sensor inputs from the on board sensors - 2x. I see there are pins 69 and 70 on the pin out list. I am unable to find how to connect to these in PCLink and I do not see them used for any inputs. Wondering how to do this so I can set up knock conditions. Thx! Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 7, 2020 Report Share Posted November 7, 2020 69 & 70 are the dedicated knock1 & knock2 input pins. You dont need to assign them, just turn on knock control, set it up and tune it. Quote Link to comment Share on other sites More sharing options...
koracing Posted November 8, 2020 Report Share Posted November 8, 2020 Here is the knock settings I used on one E36X equipped car that may give you a reasonable starting point: Use at your own risk of course. dx4picco 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.