cwhite951 Posted November 23, 2020 Report Share Posted November 23, 2020 I am finalizing a Thunder set up and I would like to have a datalogging active LED. Can't seem to find a easy route to this - any ideas? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 24, 2020 Report Share Posted November 24, 2020 Yeah, I dont think there is a direct way to do that via conventional outputs/hard wiring. Can do it via CAN to a dash or whatever. The only work around would be to set up a GP output that activates with the same conditions you have set for the logging. Quote Link to comment Share on other sites More sharing options...
PeterHay205 Posted November 30, 2020 Report Share Posted November 30, 2020 I used an illuminated push-on, push-off switch connected to a DI. When the switch is on, the DI is pulled low and logging is enabled (and the light in the switch is on), off otherwise. Very handy when you are on the start line to be able to glance down and know you have remembered in turn on logging. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.