Adamw Posted January 8, 2021 Report Share Posted January 8, 2021 The map is wrong again. CAN 2 should be off - or at least it shouldnt have a CAN Lambda assigned to a channel. CAN 1 has 2 channels set up with CAN lambda, you can only have 1. If still no joy, the next thing I would try is stepping through the different bit rates and trying the find devices thing each time - just in case bit rate was changed somehow in one of your earlier connection attempts. Quote Link to comment Share on other sites More sharing options...
Aidan99 Posted January 8, 2021 Author Report Share Posted January 8, 2021 so have done what you asked and deleted all the ones not in use and still cant find device, i tried all bit rates on the drop down and till no luck. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 8, 2021 Report Share Posted January 8, 2021 On 1/7/2021 at 5:24 PM, Adamw said: Update to the latest firmware and then have a look at the runtimes screen CAN tab and tell me if there are now errors showing on CAN 2. The map that you attached yesterday still shows old firmware. Did you attach some old map, or has it not been updated? Quote Link to comment Share on other sites More sharing options...
Aidan99 Posted January 9, 2021 Author Report Share Posted January 9, 2021 I Will try an update the firmware again but I already did that. I used the file you sent me I just reinstalled the newest firmware. Still no luck Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 9, 2021 Report Share Posted January 9, 2021 Can you attach the latest map so I can take a look again Quote Link to comment Share on other sites More sharing options...
Aidan99 Posted January 9, 2021 Author Report Share Posted January 9, 2021 Skyline base tune 3.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 10, 2021 Report Share Posted January 10, 2021 Can you try turning OBD2 off. Quote Link to comment Share on other sites More sharing options...
Aidan99 Posted January 11, 2021 Author Report Share Posted January 11, 2021 Just tried that still no luck Quote Link to comment Share on other sites More sharing options...
Aidan99 Posted January 11, 2021 Author Report Share Posted January 11, 2021 Still says there is error on can status 1, error passive and bus warning error Quote Link to comment Share on other sites More sharing options...
Aidan99 Posted January 13, 2021 Author Report Share Posted January 13, 2021 Surely something has to be faulty Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 13, 2021 Report Share Posted January 13, 2021 Not impossible I guess, but all CAN ports and the CAN lambda is tested before shipping. You cant get it to connect to either CAN port and its highly unlikely both CAN ports would have failed at the same time so I would probably rule that out. So it could potentially be a faulty CAN lambda but again pretty low chance since they are burnt in and tested before shipping. Where about's are you in the world? Quote Link to comment Share on other sites More sharing options...
Aidan99 Posted January 13, 2021 Author Report Share Posted January 13, 2021 I am in Brisbane Australia Quote Link to comment Share on other sites More sharing options...
Topher Posted March 22 Report Share Posted March 22 Bonjour, j'ai le même problème , j’ai effectué tout les test dit juste avant et rien y fait impossible de trouvé le can lambda Quote Link to comment Share on other sites More sharing options...
koracing Posted March 23 Report Share Posted March 23 Please post a copy of your tune and a PC log. Also post any error messages that come up when you press F12 and then go to the CAN tab. How have you wired in your CAN Lambda? Are there any other devices on the CAN bus besides the CAN Lambda? Quote Link to comment Share on other sites More sharing options...
team claymore Posted June 3 Report Share Posted June 3 Did you get a result because I seem to be having the exact same issue, checked power and continuity on high and low. Won't find can when I search . I'm in Melbourne Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 3 Report Share Posted June 3 On 3/24/2024 at 9:43 AM, koracing said: Please post a copy of your tune and a PC log. Quote Link to comment Share on other sites More sharing options...
team claymore Posted June 8 Report Share Posted June 8 I got it sorted, needed firmware update Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.