1qwkmini Posted January 10, 2021 Report Posted January 10, 2021 Finishing up the setup on my R53 and noticed that the Speedo/instrument cluster isn't working properly. ECT is full max and all the warning lights stay on. I suspect that the CAN supply to dash needs some configuration or?? CAN 1 is configured for CanLambda and Aim MXL dash. Do I configure CAN 2 for MiniLink? and what is the proper setup to get the instrument cluster back to proper function (worked fine with the old Vipec) Thx Quote
Vaughan Posted January 10, 2021 Report Posted January 10, 2021 CAN 2 Mode should be set to Mini R50-R53 Quote
1qwkmini Posted January 10, 2021 Author Report Posted January 10, 2021 Nope...didn't work...ECT still pinned and red warning light on (after cold start). AIM Dash shows 16C which about right for the garage. ABS etc warning lights stay on. Maybe I still have it set incorrectly. 1QWK_NEW_Test.pclx Quote
Adamw Posted January 10, 2021 Report Posted January 10, 2021 The only other thing I would change is turn the OBD2 off on CAN2. You will also need to power cycle everything (ign off for a couple of minutes or batt disconnect) to reset all modules. Quote
1qwkmini Posted January 10, 2021 Author Report Posted January 10, 2021 Perfect...all cleared now. Race car--has master shut off...just changed the OBD setting and everything is working perfectly. THX Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.