Simon Posted May 8, 2012 Report Share Posted May 8, 2012 Hi All This is the spot to ask any questions about the product prior to purchase. Any technical help questions should be posted in the Vi-pec support forum. Quote Link to comment Share on other sites More sharing options...
htf6716 Posted September 11, 2013 Report Share Posted September 11, 2013 Hey, could you tell me how it will want to buy the products? Thanks. Quote Link to comment Share on other sites More sharing options...
Simon Posted September 11, 2013 Author Report Share Posted September 11, 2013 First point of contact should be through the closest dealer to you. http://www.vi-pec.com/dealer-list Quote Link to comment Share on other sites More sharing options...
MR2 700bhp Posted March 14, 2016 Report Share Posted March 14, 2016 Hi SimonDo you have a Dealer in the UK? that stocks accessories - CANDASH - cable or a CANF - connector. - to connect to a Dash 2, from a G4 extreme.Many thanks Jon Double quote. Quote Link to comment Share on other sites More sharing options...
Simon Posted March 14, 2016 Author Report Share Posted March 14, 2016 If you go to the UK branchElectronz UK LtdPhone: 01252 493 121[email protected] Quote Link to comment Share on other sites More sharing options...
toyota aristo gs Posted October 1, 2018 Report Share Posted October 1, 2018 may be looking to purchase a link ecu for my 2jzge non vvti build. does it have a start up program already functional. Is it flex fuel compatible. Can I run it with the 7mgte igniton distributor pick up like the Aem v1. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 1, 2018 Report Share Posted October 1, 2018 2. There is a 2JZ supra base map in PC Link. 3. Yes, all our G4+ ECU's are flex fuel capable. 4. That should be no problem. Quote Link to comment Share on other sites More sharing options...
Gerardo Andrade Posted October 2, 2020 Report Share Posted October 2, 2020 Hello everyone, I'm from MexicoI would like to know where I can download the manual for a G4X or G4 + Xtreme? I have only found the G4 manual and I see that a lot has changed in the softwareI am new to this topic and I am evaluating which ECU I will buy, I have read that in addition to buying the G4X or G4 + Xtreme ECUI have to consider buying"Ballast Resistor" in case of using low impedance injectors or buying "Link Bosch EV14 1000C Injector"Could you help me with the download link for the g4X or g4 + Xtreme manualOr tell me if I have to buy something else I still don't know which engine I'm going to use, that's why I thought about the ECU G4X or G4 + Xtreme But surely it would not be any engine found in the ECU Plug In Greetings Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 3, 2020 Report Share Posted October 3, 2020 We havent done printed manuals since about 2015 since it was getting way too big (1200+ pages). The manual is in the software help file now so it is searchable and indexed etc. There is a spanish version of G4+ PC Link including translated help file if that is easier for you. The G4+ Xtreme has peak & hold injector drives so can drive low impedance injectors directly. The G4X Xtreme no longer has peak and hold drivers so will need ballast resistors for low impedance injectors. I would suggest high impedance injectors as it is much nicer than wiring ballast resistors. Quote Link to comment Share on other sites More sharing options...
Hindaroo Posted July 22, 2023 Report Share Posted July 22, 2023 We intend buying a Thunder for our Impreza Turbo, but can anyone advise what is a good gear linkage load cell for flatshifting a 6spd sequential Modena dogbox. I would prefer a compound device but will consider compression only at this stage. Andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.