kane Posted February 10, 2021 Report Posted February 10, 2021 hey guys, I'm just about to finish off my project of putting a 1jz vvti into a IS200! Before I get it to the tuners I want to make sure everything is running right, does anyone have a base map that I could use? car has: 66mm turbo (BW S366sxe) Yaris coils 1100cc inj 272 cams 98ron fuel Link fury G4x any help would be appreciated! Quote
Adamw Posted February 10, 2021 Report Posted February 10, 2021 Use the JZX100 map that is in the base map folder. kane 1 Quote
kane Posted February 10, 2021 Author Report Posted February 10, 2021 hi adam, thanks for getting back to me, so even with the bigger cams, and bigger injectors it should start up and run ok? Quote
Confused Posted February 10, 2021 Report Posted February 10, 2021 You may need to mess with the Master Fuel value to get it running roughly right (all of which is explained in the Help), but it should be enough to allow you to move it on/off a trailer, and then onto a dyno, under its own power. kane 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.