k fuku Posted March 20, 2021 Report Share Posted March 20, 2021 VVT得のエラー信号 ランタイム画面を確認すると、約800rpmでアイドリングしている場合にのみerrorextrapulseが表示されます。アクセルペダルを少し踏んで1000rpmでにするとエラーは消えます。 星スコープを見ると、スコープがあります。 これを防ぐために私にできることはありますか?シールドアース配線は既に設置済みです。センサーの接地に問題はありませありません。 www.DeepL.com/Translator(パレット版)で翻訳 Quote Link to comment Share on other sites More sharing options...
AbbeyMS Posted March 20, 2021 Report Share Posted March 20, 2021 My view is if this is only a VVT trigger and I presume the VVT doesnt start to work at a high rpm, just looked at your attached CAL (1800rpm) , I wouldn't worry about this issue , maybe the gap to the sensor is a little wide once the speed is raised the sensor can give the correct trigger signal. k fuku 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 20, 2021 Report Share Posted March 20, 2021 Can you give us another triggerscope at higher RPM, say 3000RPM. That is very odd and I cant think of a good logical explanation since the extra bump comes and goes. I would be most suspicious of either cam end float or maybe something like a small piece of metal swarf stuck to the sensor or wheel. Quote Link to comment Share on other sites More sharing options...
k fuku Posted March 21, 2021 Author Report Share Posted March 21, 2021 5000.llgx どうもますます。 帯運のスコープを設定しました。く スターターガ回転しててエンジンが得に熟します。 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.