Grant Baker Posted April 15, 2021 Report Share Posted April 15, 2021 Hi Long shot... Anybody got calibration data for a Peugeot / Citroen 1.6 16V (VTS) Coolant Temperature Sensor? The "Link 1/8NPT" seems close, but a bit low. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 15, 2021 Report Share Posted April 15, 2021 Whats the resistance at room temp? Quote Link to comment Share on other sites More sharing options...
VtrSp1 Posted April 18, 2021 Report Share Posted April 18, 2021 Normally for this sensor I use the Std NTC Bosch Calibration from the Link sensor list Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 21, 2021 Author Report Share Posted April 21, 2021 5.9K at 21 deg C. Part number is Jaegar 96.368.027 Also listed as Hella 6PT009309521 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 21, 2021 Report Share Posted April 21, 2021 There is a pre-defined Hella 6PT calibration built in, it is expecting about 6600ohm @ 20deg C so that sounds like it is close. Did you try that? Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 21, 2021 Author Report Share Posted April 21, 2021 I've done some other temperature vs resistance values: 60deg - 1.190kOhm 70deg - 0.820kOhm 80deg - 0.625kOhm I'll try the Hella 6PT. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 22, 2021 Report Share Posted April 22, 2021 Looks like it is a match Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted May 3, 2021 Author Report Share Posted May 3, 2021 Just a follow up. That was indeed perfect. Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.