Brad Foreman Posted April 18, 2021 Report Share Posted April 18, 2021 Hey there Have a link g4+ fury with ethanol content sensor wired in and working and tuned for flex fuel. Everything there is great Using a link mxs strada 1.2 dash There seems to be nothing in the software to display ethanol content Is it possible with this dash to display ethanol content ? Without changing to dare I say a hal%$#@ dash ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 18, 2021 Report Share Posted April 18, 2021 Ethanol content is in the latest revision of the ecu CAN stream but it hasnt made it in to the AIM software yet. If you attach your dash config I can manually add it with a custom stream. Quote Link to comment Share on other sites More sharing options...
Brad Foreman Posted April 18, 2021 Author Report Share Posted April 18, 2021 awesome heres the config file MXS 1.2 Strada - Link Config 01.zconfig Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 19, 2021 Report Share Posted April 19, 2021 Your updated config attached. Make sure your ECU is on the latest 5.6.8 firmware. Brad Foreman.zconfig Quote Link to comment Share on other sites More sharing options...
Brad Foreman Posted April 21, 2021 Author Report Share Posted April 21, 2021 hello there thanks for that . for some reason when i go to update firmware the newsest it says i can go is 5.6.7.3631 theres no newer option now i have it loaded in. and ethanol content is available.. but shows -% on the dash .. on pclink its displaying fine also now my gear selection is stuck on 1. where as was working fine before. works fine on pclink Quote Link to comment Share on other sites More sharing options...
Brad Foreman Posted April 21, 2021 Author Report Share Posted April 21, 2021 actually found out how to update . update went good. ethanol content is working on the dash display. but somehow gear selection has stopped working on the display and works fine on pc link Quote Link to comment Share on other sites More sharing options...
Sterling Posted April 21, 2021 Report Share Posted April 21, 2021 Adam - can you share how you did that? I’d like to have ethanol content on my AiM MXL2 as well Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 21, 2021 Report Share Posted April 21, 2021 @Brad Foreman Try your dash config attached. Everything looks correct in the last setup as far as I can see. In this one I have changed the Gear position to use an encoded value rather than just the raw number, lets see if that works. @Sterling Attached below is a .xc1 file. Go to the CAN Protocols builder in RS3 (<>+ icon at top left of RS3), in that screen click import and navigate to this .xc1 file. Once imported close that screen and open your dash config file for editing. Go to the ecu stream tab and click on changhe ecu, in the Link folder you will now have an ecu named "Generic New", select that. When a screen pops up asking to rename channels or whatever uncheck the box that says "use previous names" or similar and click ignore at the bottom. Fix any errors on your display pages and alarms. Save and send the config to the dash. Brad Foreman V2.zconfig LINK_Generic New_@20210104_075506_008240.xc1 Quote Link to comment Share on other sites More sharing options...
Brad Foreman Posted April 22, 2021 Author Report Share Posted April 22, 2021 hey still nothing . the can stuff is above my head so i cant trouble shoot anything . whats wierd is if i go back to my original config it works fine Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 22, 2021 Report Share Posted April 22, 2021 Try this one. R and N wont work but it may give us an idea what is going on. I dont have a dash with me to test at the moment. Brad Foreman V3.zconfig Quote Link to comment Share on other sites More sharing options...
Brad Foreman Posted April 22, 2021 Author Report Share Posted April 22, 2021 It works !!! only thing different is neutral use to be N but now its 0 Quote Link to comment Share on other sites More sharing options...
Brad Foreman Posted April 23, 2021 Author Report Share Posted April 23, 2021 Adam thank you for the support!! Quote Link to comment Share on other sites More sharing options...
ytubit Posted February 23, 2022 Report Share Posted February 23, 2022 Hi, i dont suppose you could add the ethanol content fix to my file. I tried importing the above can protocol and everything worked fine but Gear position is missing from that one which i need. cheers Cory MXS 1.2 Strada Cory.zconfig Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 23, 2022 Report Share Posted February 23, 2022 This is an old thread, the dash stream has since been updated and includes Ethanol content. I just had a look in your dash config and you already have it there. If it is not working then it probably means your ECU is on old firmware. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.