Rozsko Posted May 4, 2021 Report Share Posted May 4, 2021 Do you guys know if it is possible in any way to log the ignition trigger signals that are driven through the Aux ign outputs? Tried the IGN status parameters, but those are always active it seems. Thanks, Béla Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 4, 2021 Report Share Posted May 4, 2021 What function is on the ignition drive? Some functions are active all the time and just duty or frequency will vary. Example below would be the parameter that shows ign 5 turning on/off for engine fan 3 Quote Link to comment Share on other sites More sharing options...
Rozsko Posted May 4, 2021 Author Report Share Posted May 4, 2021 3 minutes ago, Adamw said: What function is on the ignition drive? Some functions are active all the time and just duty or frequency will vary. Example below would be the parameter that shows ign 5 turning on/off for engine fan 3 Ignition. For which duty and freq seems to be 0 all the time and status seems to be always active. So what I am looking for really is the analog voltage signal of the first four ignition driver that are triggering the cop coils. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 4, 2021 Report Share Posted May 4, 2021 The analog voltage is not monitored/measured. The on/off status of ignition outputs when they are doing ignition is not something you can see as they are synchronously controlled by the engine time processor. Rozsko 1 Quote Link to comment Share on other sites More sharing options...
Rozsko Posted May 5, 2021 Author Report Share Posted May 5, 2021 That is very sad, but thanks Adam. As always, appreciate you taking the time to help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.