neil brown Posted August 26, 2021 Report Share Posted August 26, 2021 Can any of the experts tell me if can can used on this ecu for additional outputs/inputs ie toucan display or additional i/o module Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 26, 2021 Report Share Posted August 26, 2021 With G4+ you can do standard on/off type aux outputs over CAN. No PWM except for fuel pump speed. You can have 8 generic digital inputs via CAN as well as wheel speeds and a few dedicated functions such as AC request. Analog inputs via CAN are a bit restrictive. There are 8 generic CAN AN Volt channels but you cant rename/label or apply units to these. You can still log these or use them on tables or to control virtual auxes etc but they dont have all the functionality of hardwired AN Volt channels. There are a few dedicated CAN Analog inputs which are more useful though, Fuel press, Oil Press, exhaust press, AP sub & main, Lambda 1-8 can all be received via CAN and work just like the hardwired equivalents. Inputs that can be received via CAN listed below. Quote Link to comment Share on other sites More sharing options...
neil brown Posted August 26, 2021 Author Report Share Posted August 26, 2021 Thanks adam Is there a pin out for this ecu and can connections is that on the can plug on ecu body Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 26, 2021 Report Share Posted August 26, 2021 Yes, in the help file Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.