ozyvr4 Posted February 4, 2022 Report Share Posted February 4, 2022 Hi there , I'm doing a Powertune Dash install on a mates GSR Lancer . I have wired the fuel sender to the the ECU and getting readings. I'm using GP ANV 1 and have set up basic table to start. I've searched the Generic Dash Stream under Stream 1 and found the GP Analogue under frame 10..I've selected fuel level as I have name that in the Link software. I can't get it to display. I've also tried AN 1 voltage but still nothing. I'm not efficient on the CAN info yet but am keen to learn. This is also my first powertune dash install but have friends that use them regularly so once data is available should able o work that out. I have added the tune file so if someone can help , it would be appreciated. Jeromes GSR.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 4, 2022 Report Share Posted February 4, 2022 Try this. Im not sure on what scaling the dash expects for fuel level so you may have to put a multiplier of 10 or 100 on it if it doesnt work or look correct. JeromesGSR V2.0.pclx Quote Link to comment Share on other sites More sharing options...
ozyvr4 Posted February 4, 2022 Author Report Share Posted February 4, 2022 Awesome . Thank you Adam. Ill give it a go tonight and let you know.. Quote Link to comment Share on other sites More sharing options...
ozyvr4 Posted February 9, 2022 Author Report Share Posted February 9, 2022 I got it to work. I tried that and it didn't work , but it was very close. Powertune actually have the setting listed on there website. Thank again Adam Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 9, 2022 Report Share Posted February 9, 2022 6 hours ago, ozyvr4 said: Powertune actually have the setting listed on there website. They only have an example for G4+ (uses different CAN scaling to G4X) on their website, much of that example is set up wrong, and it doesnt give any info about how the fuel level cal table was set up in the ecu which also effects the CAN output. Hence my comment that scaling was unknown. Quote Link to comment Share on other sites More sharing options...
ozyvr4 Posted February 9, 2022 Author Report Share Posted February 9, 2022 Oh cool ..Good to know I do have it running but I get my mate to confirm when he puts fuel in to make sure it matches the ecu readings. Thanks again. Quote Link to comment Share on other sites More sharing options...
Richard Hainsworth Posted March 1, 2022 Report Share Posted March 1, 2022 Hey bud can you expand on how you made it work and the difference between g4+ and g4x protocol. I’m struggling to get this sorted on my ek civic. Got it displaying fine on pclink as a % but even working in with powertune I can’t get it sorted. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 1, 2022 Report Share Posted March 1, 2022 10 hours ago, Richard Hainsworth said: Hey bud can you expand on how you made it work and the difference between g4+ and g4x protocol. I’m struggling to get this sorted on my ek civic. Got it displaying fine on pclink as a % but even working in with powertune I can’t get it sorted. Attach your tune. Quote Link to comment Share on other sites More sharing options...
VegasAWD Posted October 30, 2022 Report Share Posted October 30, 2022 On 3/1/2022 at 2:07 PM, Adamw said: Attach your tune. Hi, Adam, I'm struggling to get my anv5 Fuel Level working on Powertune. Any pointers? I've used the exact same settings from their manual. Thanks for any help. This is g4+ btw stream.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 30, 2022 Report Share Posted October 30, 2022 Looking at their doc I would say the frame ID needs to be 2 for the fuel level frame. Quote Link to comment Share on other sites More sharing options...
VegasAWD Posted October 30, 2022 Report Share Posted October 30, 2022 18 minutes ago, Adamw said: Looking at their doc I would say the frame ID needs to be 2 for the fuel level frame. Hi Adam, I've tried 0,1, and2. Unless I'm looking for the wrong parameter on the dash it's not showing up. No fuel level parameter ever shows up and I've tried analog6 on the dash. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 30, 2022 Report Share Posted October 30, 2022 I guess its a question for them in that case, I've never touched one. VegasAWD 1 Quote Link to comment Share on other sites More sharing options...
VegasAWD Posted October 31, 2022 Report Share Posted October 31, 2022 I fixed this issue. I copied the settings stated in the manually exactly and wound-up choosing parameter "fuel tank level" on the dash and changing the units to %. It showed as 1% on the dash but the ecu was reading 12%, so I changed the multiplier in CAN setup from 1 to 10 and now my dash reads 12%. I think what confused me and a lot of people is they don't explicitly say your custom stream will show up under "fuel tank level". The ANV5 is a custom GP input so I didn't expect it link to the powertune "fuel tank level" because in Link it didn't have that "function" attached to it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.