Wheelspk Posted April 26, 2022 Report Share Posted April 26, 2022 hello, i wanted to get fuel level reading in my pc link on my 4gx monsoon ecu as i have installed a digital dash by power tune. its a rx7 with a 1jz swap how do i go on configuration my monsoon 4gx that i get reading on my pc link? power tune digital has given setting for the pc link can stream, i tired that with signal going to analog volt 2. im stuck please help. thanks. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 26, 2022 Report Share Posted April 26, 2022 Can you attach your tune. How is the fuel level sensor connected - have you added a pull-up resistor? Quote Link to comment Share on other sites More sharing options...
Wheelspk Posted April 27, 2022 Author Report Share Posted April 27, 2022 6 hours ago, Adamw said: Can you attach your tune. How is the fuel level sensor connected - have you added a pull-up resistor? i have used this way to make a filter to slow down the signals, and after following this chart i added the he stream, not knowing what parameters too add i added im kinda stuck. rx7 tune.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 27, 2022 Report Share Posted April 27, 2022 What AN Volt input is the fuel level signal connected to? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.