Timboj Posted July 11, 2022 Report Share Posted July 11, 2022 Hi team, I did some searching but couldn't find the answer easily enough amongst the posts. Can we also use a 5V source for a DI input, or 12V only? I was planning on wiring to an IGN power source, but is there any value in using a constant or ACC? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 11, 2022 Report Share Posted July 11, 2022 switch to 12V, 5V, or gnd is fine. Quote Link to comment Share on other sites More sharing options...
Timboj Posted July 11, 2022 Author Report Share Posted July 11, 2022 As in, I can run a single wire switched circuit from a DI pin to ground and that will work? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 12, 2022 Report Share Posted July 12, 2022 Correct. If you want to switch to ground you just enable the pull-up in the DI settings. Quote Link to comment Share on other sites More sharing options...
Timboj Posted July 12, 2022 Author Report Share Posted July 12, 2022 Wow, that's way more convenient than splicing into power. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.