NEED 2JZ-GTE-VVTI confgured about the trigger and vvti setting

[Jdnduh]

Hi all. my ecu is furyX,and my machine is the 2jz-gte-vvti.  The current state of my machine is OEM cylinder diameter, stroke and camshaft. Now I want to get a fully configured map about the trigger and the correct configuration of vvti setting. i really need some help, thank you !

[Adamw]

Use the JZX100 basemap in PC Link.

[Jdnduh]

7 hours ago, Adamw said:

Use the JZX100 basemap in PC Link.

but the JZX100 engine is the 1jz non-vvti ,can the setting suit for 2jz-gte-vvti ?

thanks !

[Adamw]

The JZX100 is 1JZ vvti, the trigger and VVT setup is identical to the 2JZ VVTi.  

[Jdnduh]

thank you very much,may I have another question to ask you ? that is, on the G4 + software, we can see that the channel clock of auxiliary output can directly set the option of camshaft vvti solenoid valve, but it is not available in G4X. I would like to ask how to set the channel of camshaft vvti solenoid valve in G4X software?

thank you

[Adamw]

Please use the JZX100 map it is already set up correctly.  

VVT aux output is assigned in >VVT Control>Bank 1>Inlet Bank 1>PWM Output.

[koracing]

In G4X you set outputs typically in the menus for those controls if they are not listed in the Aux Output preconfigured outputs listing. 

[Jdnduh]

On 8/27/2022 at 4:12 PM, Adamw said:

Please use the JZX100 map it is already set up correctly.  

VVT aux output is assigned in >VVT Control>Bank 1>Inlet Bank 1>PWM Output.

Thank you!

16 hours ago, koracing said:

In G4X you set outputs typically in the menus for those controls if they are not listed in the Aux Output preconfigured outputs listing. 

Thank you!