Jump to content

AltezzaLink TALTX E throttle


Recommended Posts

You have 0 integral in the E-throttle control.  This means the control loop will never correct for the small amount of long term error, so TPS main will never match E-throttle target well, there will always be some error.  Set Integral gain to 0.05 as a starting point will usually be enough.  Note when you change this setting it is going to mess upo your current idle settings quite a bit as the throttle will now be much closer to the commanded position - so a lot of the idle control will need re-tuning.  


Link to comment
Share on other sites

Thank you very much your advice helped and problem solved but now i have another problem outside is 0-3 celsius and outside temp sensor starts counting from 1 and going up to 40-41 celsius any suggestions how can i solve this problem?


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...