ellisd1984 Posted March 6, 2023 Report Share Posted March 6, 2023 Hopefully just a quick one. II'm rewiring my car and moving alot of stuff onto a pdm. However, the stock ecu used to have both a permanent 12v feed and a switched 12v feed on a separate fuses. Does the st205x pluging require this permanent feed, or is it happy just using a switched feed from the pdm? The manual shows both being used but not sure if it's required. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 6, 2023 Report Share Posted March 6, 2023 The 12V constant on pin 61 is not used. "nc" in our pinout means not connected. Quote Link to comment Share on other sites More sharing options...
ellisd1984 Posted March 7, 2023 Author Report Share Posted March 7, 2023 Perfect, one less thing to have to keep a fuse for! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.