TranzerZ Posted March 24, 2023 Report Share Posted March 24, 2023 Hello all. I have an Infiniti G35 and I was thinking of sharing my ethanol sensor 12V line with my boost solenoid 12V line. Would that be ok or is it a bad idea and may cause some interference? Also, how do I set the ethanol parameters in G4X? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 24, 2023 Report Share Posted March 24, 2023 That should be fine. For the ethanol sensor just go to >digital inputs>Ethanol sensor, assign the source , ensure the pull-up is on and the active edge is rising. You will then have working ethanol % and temperature. From there the whole fuel model will have to be set up and tuned if the intent of the sensor is flex fuel functionality. Quote Link to comment Share on other sites More sharing options...
TranzerZ Posted March 24, 2023 Author Report Share Posted March 24, 2023 Thanks for your help as always Adam! So knowledgeable... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.