Zeitronix Zt-4 with Link Storm G4+

[Ian C]

Hi,

After suffering yet another "reported" sensor failure, using the Innovate DLG-1, I decided to cut my losses and have installed a Zeitronix Zt-4 with a Zr-4 gauge.  The only preconfigured setting is for the Zt-3, can you confirm that this will work with the Zt-4 or recommend and alternative.

Many thanks,

Ian

[Vaughan]

Having a quick look at the Zeitronix website (https://www.zeitronix.com/Products/Zt-4/Zt-4.shtml) it looks like they only have analog outputs not CAN, is this correct?

I can't easily find the calibration values for a Zeironic ZT-3 in the software but it does look like the outputs on the Zt-3 and Zt-4 can be configured to whatever voltage you want for each Lambda value.
This would mean you can set it up how you want and then setup a calibration table to match.

[Adamw]

The default analog output for all zeitronics devices is the same 0 Volts = 9.6 AFR, 5.0 volts = 19.6 AFR, although they dont say what stoichometric ratio they base that on I would assume 14.7 is most likely.