0x33 Posted April 27, 2023 Report Share Posted April 27, 2023 Be nice to have a seperate setting for 100% throttle for flood clear on startup. Simple checkbox option. Can integrate this into crank enrichment map normally, but becomes a problem when using multifuels that require axis setup on ethanol % Quote Link to comment Share on other sites More sharing options...
essb00 Posted April 28, 2023 Report Share Posted April 28, 2023 Make a GP output to a virtual aux, and use that virtual aux as 'Stop Switch' or 'Anti-Theft'. Quote Link to comment Share on other sites More sharing options...
0x33 Posted April 28, 2023 Author Report Share Posted April 28, 2023 I dont have any spare virtual aux's on the application I'm working on, hence a dedicated setting for it would be nice so I dont have to waste a virtual aux on it. Quote Link to comment Share on other sites More sharing options...
essb00 Posted April 29, 2023 Report Share Posted April 29, 2023 ...how about unused CAN Aux? It would function the same. 'Stop Switch' is already a dedicated setting - but you just need to set conditions via GP Output (for additional parameter validation) or just directly to a DI. Up to you. Quote Link to comment Share on other sites More sharing options...
0x33 Posted April 29, 2023 Author Report Share Posted April 29, 2023 Or you know, they could just build this feature into the start up settings, wouldnt be that difficult rather than wasting I/O on a fairly basic function. Stop Switch & Antitheft will disable ignition, which is not ideal. You want the motor to turn over with ignition, so if there is fuel in cylinder it will still fire, just injectors wont fire on top of that. koracing 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.