danamaniac Posted June 23, 2023 Report Share Posted June 23, 2023 Hello, trying to setup vvt on my ignis sport, keep getting "2nd cam pulse error. Config and log attached. ignis.pcl log.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 24, 2023 Report Share Posted June 24, 2023 Have you tried the Switft V2 VTC trigger mode and VVT mode? Quote Link to comment Share on other sites More sharing options...
Dano.Mano Posted June 24, 2023 Report Share Posted June 24, 2023 Have not, I shall try it. also in the ignis there is an ax evap temp. Looks like ax temp is controlled by ecu and not the climate control system. Ax is just on all the time. Is there any way to to use the temp input to control with ecu. ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 24, 2023 Report Share Posted June 24, 2023 There is no native AC evap temp control in the V series. If you had a spare aux output and digital input you could do a crude hack by connecting a aux directly to a DI and setting up a GP output to turn the AC request DI on/off based on pressure. Quote Link to comment Share on other sites More sharing options...
Dano.Mano Posted August 6, 2023 Report Share Posted August 6, 2023 What about timers? Is there a way to setup timer so like, 20 seconds off, 30 seconds on, that constantly repeats. otherwise I will just make a thermostat circuit. or is there a go to thermo that people use in this situation? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 7, 2023 Report Share Posted August 7, 2023 You would still have to do it like I suggested above as you need to switch the request on and off, rather than just the output so you get the proper clutch delay for idle up etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.