Lawsonisconfused Posted June 24, 2023 Report Share Posted June 24, 2023 Hi guys, I have a 300zx plug in ecu and I'm trying to get my can lambda kit to communicate to it. I have checked the setup settings, cleared and re-done them. The can unit is getting 12v but still doesn't show up in can devices. I have it wired in with the canjst cable. Why is it not showing up or am I missing something. Cheers, Jack. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 24, 2023 Report Share Posted June 24, 2023 Attach a copy of your tune. Quote Link to comment Share on other sites More sharing options...
koracing Posted June 24, 2023 Report Share Posted June 24, 2023 Most likely your can bus speed is incorrect for what the Link CAN Lambda is set for. It should be set to 1Mbit but it can be changed via the software. If it's not being detected at 1Mbit/s - try the other speed options and detect again. If your CAN Lambda isn't the Link can lambda - it won't be detected. Depending on the brand you may have some wiring mismatch also for CANH/L as well (Haltech for example). Quote Link to comment Share on other sites More sharing options...
Lawsonisconfused Posted June 24, 2023 Author Report Share Posted June 24, 2023 I will attach my tune when I'm back with the car but it is the link can lambda and I did try every single speed options hoping that was it but nope Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.