Walker motorsport Posted August 3, 2023 Report Share Posted August 3, 2023 Hi there, For my race only car: I already have a launch control setup which works great using clutch switch DI, but i also want to have another DI to use for pit lane speed limiter. is this possible? I dont have any form of speed trigger / sensor, i.e. i only have RPM and Gear so from what i can see i cant use any speed limit options? Any help will be appreciated Thanks Andrew Quote Link to comment Share on other sites More sharing options...
Vaughan Posted August 3, 2023 Report Share Posted August 3, 2023 Could use a GP RPM Limit with the switch on one axis and pick an RPM that matches speed for the gear that you will be in. Quote Link to comment Share on other sites More sharing options...
Walker motorsport Posted August 3, 2023 Author Report Share Posted August 3, 2023 Thanks Vaughan ill give that a go. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 3, 2023 Report Share Posted August 3, 2023 I think something like below would do it. I have a virtual aux set up to activate launch control when the clutch switch OR the Pit switch is active. In the 3D launch table I have the Pit switch on the Y axis so it will use the top row of the table for launch control or the bottom row for pit limiter. Then you can put gear on the X axis if you want to factor gear into the pit limit. TTP 1 Quote Link to comment Share on other sites More sharing options...
DerekAE86 Posted August 3, 2023 Report Share Posted August 3, 2023 Slightly related - is there a way to toggle and latch limit tables between power cycles in software? Without the need for a physical toggle switch that will keep an input high or low. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.