Kwaka140 Posted August 16, 2023 Report Share Posted August 16, 2023 I'm running a Link G4+ Atom on my motorcycle. I have added a turbo and now need a professional to make sure my setup is correct and to tune it. I'm located in Auckland. Finding someone who is both knowledgeable of the ECU and who also tunes motorcycles and has a suitable dyno is being a bit of a challenge. Suggestions please. No problems travelling round the North Island to do it. If a trip to the South Island is required then so be it. Thanks Quote Link to comment Share on other sites More sharing options...
cws_nz Posted August 18, 2023 Report Share Posted August 18, 2023 try Mark at revolution engines in morrinsville, I know hes done a few bikes, he has a mainline hub dyno, but i think uses one of the local bike shops dyno Quote Link to comment Share on other sites More sharing options...
Kwaka140 Posted September 12, 2023 Author Report Share Posted September 12, 2023 A youtuber I've messaged previously agreed to have a look. He has a car dyno but had already made a bracket for the front wheel which he clamped to one ramp. It worked a treat and after 3-4 hours of tuning it went from "can spin the rollers" to " damn fine". Actual power figures were inflated due to only spinning the front roller. Without the rear roller inertia the dyno thought the vehicle was doing better than it actually was. Either way I'm very happy with the result, 43.4kw indicated. I might be able to get a dyno run in on a known bike dyno to measure what the actual power is later this week or early next. YT channel here - Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.