Striker Posted November 24, 2023 Report Share Posted November 24, 2023 I have wrx107x ecu and right now I’m using my prosport wideband O2 controller to send an analog signal to the ecu for the wideband reading. I was looking at changing over to the link can lambda. I have a link can gauge plugged into can1 on ecu. Which is a better option, do I use a can splitter and share with can1 or do I use can2? thanks Quote Link to comment Share on other sites More sharing options...
Confused Posted November 24, 2023 Report Share Posted November 24, 2023 Yes, you can put multiple devices on a CAN bus - the only requirement is that they all run at the same "speed". All of Link's products default to 1mbit/s speed, so it's absolutely not a problem. You're correct that you can use a CAN-TEE to add extra devices. Quote Link to comment Share on other sites More sharing options...
koracing Posted November 27, 2023 Report Share Posted November 27, 2023 I would keep it on CAN1 to keep it simple with a splitter like suggested. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.