Rylowe626 Posted January 27 Report Share Posted January 27 Hey guys I’ve recently finished up my turbo Toyota echo build and have added a Can Lambda module. I followed the setup steps in the manual but it cannot detect any can devices double checked all my wiring it’s getting 11v with ignition on and canbus wiring is going to the correct pins can’t seem to work it out any advice is highly appreciated Ecu is a monsoonX Quote Link to comment Share on other sites More sharing options...
Aaron K Posted January 27 Report Share Posted January 27 Can you illustrate your wiring for the CAN setup, and does it have the 120 ohm resistor at the end (assuming it's the only device)? Quote Link to comment Share on other sites More sharing options...
essb00 Posted January 27 Report Share Posted January 27 Also post a copy of your tune file and also short PC log (even if the engine not running/not started, CAN Lambda runtime values would already be logged). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.