relax671 Posted January 28 Report Share Posted January 28 where do i start? Quote Link to comment Share on other sites More sharing options...
essb00 Posted January 28 Report Share Posted January 28 ...by posting a copy of your tune file, trigger scope log, and short PC log while trying to start. Quote Link to comment Share on other sites More sharing options...
relax671 Posted January 28 Author Report Share Posted January 28 bh.pclxPC Datalog - 2024-01-27 4;00;50 pm.llgx Quote Link to comment Share on other sites More sharing options...
Vaughan Posted January 28 Report Share Posted January 28 Attach a trigger scope please Quote Link to comment Share on other sites More sharing options...
relax671 Posted January 29 Author Report Share Posted January 29 PC Datalog - 2024-01-27 4;00;50 pm.llgxPC Datalog - 2024-01-29 2;06;26 pm.llgxTriggerScopeLog2.llgxTriggerScopeLog.llgx Quote Link to comment Share on other sites More sharing options...
relax671 Posted January 29 Author Report Share Posted January 29 TriggerScopeLog.llgxTriggerScopeLog2.llgxTriggerScopeLog3.llgx Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 29 Report Share Posted January 29 The trigger scope confirms there is indeed no signal from the cam sensor. The scope is showing a flatline of about 10V, so that suggest the sensor has power and the signal wire does have continuity back to the ecu. From this I would say the two most likely causes would be the sensor is faulty or the ground is missing from that sensor. The trigger 2 sensor is the right hand inlet cam (bank 1) sensor, you could try swapping it with the LH sensor as a quick test to rule out the sensor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.