TranzerZ Posted April 2 Report Share Posted April 2 Hi All, I just got my car back from the paint shop and now none of the power windows and door locks are responding. No sound, no clicks. Just dead. I checked all connections and even replaced the master switch actuator. There doesn't seem to be a dedicated fuse for them but I checked a few of them anyways. It may be that the BCM went bad. So my question is, if I get a replacement BCM, it needs to be programmed by the dealership but I have the Link ECU. Would that be a problem? Is there an alternative solution? Also, if anyone else ran into a similar problem, please share your experience and solutions. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 2 Report Share Posted April 2 Yeah I dont think that would be an issue. All devices are on the same bus so the programming tool should still be able to access the BCM without the ecu present. Only the BCM needs to be paired to the keyfob. Quote Link to comment Share on other sites More sharing options...
TranzerZ Posted April 2 Author Report Share Posted April 2 That's good to know. Thank you Adam as always. I'm gonna troubleshoot some more and hope it's not the BCM. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.