nimrod_pro Posted May 13, 2014 Report Share Posted May 13, 2014 I have a G4 Storm to control a Chevrolet small block. Im using all 4 injectorchannels to fire my 8 injectors. Which driver (1234)  to which injector(12345678) ? Stock it´s just 2 banks left and right. Do i have any benifits running 4 channels? I have read in the help that odd driver numbers should be wired in one bank and even in another but on which side of the engine? Animated firing order SCB Attaching my .pcl im running for now  camaro2014.pcl Quote Link to comment Share on other sites More sharing options...
Scott Posted May 15, 2014 Report Share Posted May 15, 2014 Good morning, When using multi-group fuel mode the fuel is injected either once or twice per engine cycle (720 degrees for your engine) depending on what you have 'Injection rate' set to. Because of this we recommend wiring the cylinders in groups of odds and even. As you have a storm this is how I would wire the injectors. Injection drives 1 and 3 to cylinders 1,3,5,7. Injection drives 2 and 4 to cylinders 2,4,6,8. Regards, Scott Quote Link to comment Share on other sites More sharing options...
Craig Jennings Posted June 24, 2014 Report Share Posted June 24, 2014 To tag on I'm doing the same but with 4 cylinders. Way I figured 1-4 running 1-4. But no? So I should have 1 going to 1 and 3 and 2 going to 2 and 4? With 3 and 4 driving nothing. I only get 1 and 3 injecting the way I have it now, does that sound right? Why can't we just have batch where we wire 1 injector per drive? Fire 2 injectors at once. That way when we get trig 2 going we can run sequential? Can I alter the firing seqence or something to change it to accommodate how I'valready wired it? Im running waste spark also. Quote Link to comment Share on other sites More sharing options...
Craig Jennings Posted June 24, 2014 Report Share Posted June 24, 2014  So I should have drive  1 going to inj 1 and 3. Drive  2 going to inj 2 and 4? With 3 and 4 driving nothing. Quote Link to comment Share on other sites More sharing options...
Craig Jennings Posted June 25, 2014 Report Share Posted June 25, 2014 Ah, I know what I've done, I've wired my ignition like a subaru!Hahahahaha, shit.Anywho, my question still stands re: injection. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 25, 2014 Report Share Posted June 25, 2014 On a 4 cylinder you can chose to have 1, 3 on drive 1 . 2,4 on drive two or have 1-1 2-2 3-3 4-4 If you pair them it does give you two drives free to use a aux outputs. But be sure to set the active drives as 1-2 Quote Link to comment Share on other sites More sharing options...
Simon Posted June 25, 2014 Report Share Posted June 25, 2014 I should also add that when in group mode the drives are fired in 2 groups odds and evens half a cycle apart. Quote Link to comment Share on other sites More sharing options...
Craig Jennings Posted June 25, 2014 Report Share Posted June 25, 2014 Thanks Simon, champion That's all nice and logical and means I can run some LPG injectors later when I need more headaches! Â Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.