Grant Baker Posted June 6, 2015 Report Share Posted June 6, 2015 Hi Guys, Anybody got any example setup info / settings for VVT control on a G4+ plug in for a GTR 33 RB25DET ? In the sample file supplied the Cam control mode is "off". Anybody got a base map they could share with me I would be very grateful... Thanks Grant [email protected] Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted June 6, 2015 Author Report Share Posted June 6, 2015 Just to add... I do realise they don't have "true" VVT - it's just an on/off oil pressure switch. Quote Link to comment Share on other sites More sharing options...
John Tosh Posted June 6, 2015 Report Share Posted June 6, 2015 Grant if its just an on-off pressure switch like the Vtec solenoid then you may just need to configure it as an Aux output/CAM-switched.Then set cond1 rpm< say 3500 rpm. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 7, 2015 Report Share Posted June 7, 2015 You will need to set the Aux as cam switched. Conditions to switch are usually on at 2000ishrpm and off again at 5000ish.  So set conditions as per attached image. Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted June 8, 2015 Author Report Share Posted June 8, 2015 Thanks - that's basically what we have Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.