Bud Posted September 18, 2012 Report Share Posted September 18, 2012 Dear all, i order for my car a link Ecu G4 plug in for my subaru V5-V6. I want connect Aim dashboard on the ECu. it is possible? in advance thank you Quote Link to comment Share on other sites More sharing options...
Scott Posted September 19, 2012 Report Share Posted September 19, 2012 Hi Ludovic, Yes your ECU can connect to an Aim dash. You will require a cable that plugs into the CAN/Serial socket on your ECU, this is available through your closest Link dealer. You can either connect using serial or CAN Serial: http://www.mychron4.com/download/ecu/racing/aim_LinkG4_NoAdapter_100_eng.pdf or CAN: Your ECU will need to have a serial number greater than 10,000 or have had a CAN upgrade. I have a document describing how to connect your Link ECU to an AIM dash over CAN. If you email me at [email protected] I will email you the document. Cheers, Scott http://www.mychron4.com/download/ecu/racing/aim_LinkG4_NoAdapter_100_eng.pdf'> Quote Link to comment Share on other sites More sharing options...
Bud Posted September 24, 2012 Author Report Share Posted September 24, 2012 Hi Scott thank you very much for your answer. I find JST connector 5 pin, is it possible ti give me the Pin out of JST conector for i can built my harness for the Dashboard? In advance thank you Best regards Quote Link to comment Share on other sites More sharing options...
Simon Posted September 24, 2012 Report Share Posted September 24, 2012 You should now have email from the Sales / Support team. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.