neil brown Posted March 30, 2014 Report Share Posted March 30, 2014 can the g1 ecu support boost limiting in gear  will be running a ppg 5 speed gearbox with 1.8 bar of boost, but it has a standard uk 5th gear cog and dont think it will link it will like 1.8 bar of boost  can this ecu has spare input wire to activate a low boost setting ? Quote Link to comment Share on other sites More sharing options...
Simon Posted March 31, 2014 Report Share Posted March 31, 2014 No the G1 is unable to support this function. For low boost you can intercept the power supply to the boost solenoid so that when not powered you get low boost and when powered you get full boost. Quote Link to comment Share on other sites More sharing options...
neil brown Posted June 30, 2014 Author Report Share Posted June 30, 2014 going to wire this in before i get remapped in august  it wont affect the ecu any way at all ? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 1, 2014 Report Share Posted July 1, 2014 Nope no effect at all to the ECU. Quote Link to comment Share on other sites More sharing options...
neil brown Posted July 2, 2014 Author Report Share Posted July 2, 2014 so if i am mapped for talking 1.8 bar of boost with the boost solenoid active  i disconnect the supply to the boost solenoid and run actuator pressure around 1 bar,  will the ecu not over fuel as been mapped to 1.8 bar or does it self adjust to 1 bar of pressure Quote Link to comment Share on other sites More sharing options...
Simon Posted July 3, 2014 Report Share Posted July 3, 2014 No as the ECU will be running in the area of the map that has been tuned for that level of boost. As long as you tune for the highest boost you will run it will be fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.