neil brown Posted April 2, 2008 Report Share Posted April 2, 2008 runs finew for a while then cuts out, display in hand controller goes off and the comes back on and car looses all power then back on is there a wiring mod necessary for these ecu's as fitted to a ver 4 impreza and been mapped by andy forrest help as it's driving me up the wall Quote Link to comment Share on other sites More sharing options...
Simon Posted April 3, 2008 Report Share Posted April 3, 2008 You need to check all the power supplies and the earths to the ECU. When the remote drops out this is a sign that the ECU has had a loss of power. Simon Quote Link to comment Share on other sites More sharing options...
neil brown Posted April 3, 2008 Author Report Share Posted April 3, 2008 looks like i have a dry joint on the link pcb, as when the conector for the loom is moved it cuts out anywhere that can go thro the pins and resolder would be nice in glasgow Quote Link to comment Share on other sites More sharing options...
neil brown Posted April 5, 2008 Author Report Share Posted April 5, 2008 found my problem skt on link ecu a few pins not soldered too well, poor contact, all resoldered for the skt so hopefully happy days if all is well Quote Link to comment Share on other sites More sharing options...
Simon Posted April 6, 2008 Report Share Posted April 6, 2008 Any electronics repair type place should be able to sort this for you. Simon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.