neil brown Posted January 13, 2013 Report Share Posted January 13, 2013 can a link display work with a g1 ecu if its pc tuneable  would like more info instead of hand controller Quote Link to comment Share on other sites More sharing options...
Simon Posted January 15, 2013 Report Share Posted January 15, 2013 Yes it can you will need a serial link connected also. Quote Link to comment Share on other sites More sharing options...
Simon Posted January 21, 2013 Report Share Posted January 21, 2013 Yes that is the device, If you have USB as an option then its a ComLink you have but it will work the same. For pricing you should contact the local dealer. Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 11, 2014 Author Report Share Posted January 11, 2014 2nd photo Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 11, 2014 Author Report Share Posted January 11, 2014 link display connector Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 11, 2014 Author Report Share Posted January 11, 2014 link display st up for possum link Quote Link to comment Share on other sites More sharing options...
Simon Posted January 12, 2014 Report Share Posted January 12, 2014 Yep there is a cable to go between the display and the serial link with matching connectors at each end. Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 13, 2014 Author Report Share Posted January 13, 2014 whats the part number so i can get a price from my local dealer in kilmarnock Quote Link to comment Share on other sites More sharing options...
Simon Posted January 13, 2014 Report Share Posted January 13, 2014 I would try giving it a reboot. If you hold the enter key (bottom most one) down while powering up the unit this will put it through a reset. I don't actually have a part number for the cable, there is a chance we would have to make up a custom one. As stock looks to be all gone. Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 14, 2014 Author Report Share Posted January 14, 2014 tried the reboot make no difference at all opened up unit found white plug melted which the 2cables go onto and a centre pin with brown cable for power feed melted and pin going into black pcb to be very poor and loose  there is enoogh lenghth on cables to be reterminated but the black pcb looks it had a fry. is the black pcb available Quote Link to comment Share on other sites More sharing options...
Simon Posted January 15, 2014 Report Share Posted January 15, 2014 We could do a repair here and replace just the damaged bits. Which wouldn't be as bad as a total replacement. Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 15, 2014 Author Report Share Posted January 15, 2014 that would be good if it is repairable  so i would post it from scotland to where  i can be contacted on [email protected] Quote Link to comment Share on other sites More sharing options...
Simon Posted January 15, 2014 Report Share Posted January 15, 2014 Send it in to us direct Electronz Ltd 22 Mowbray St Waltham 8023 Christchurch New Zealand. Please fill in the following form before return. https://docs.google.com/spreadsheet/viewform?usp=drive_web&formkey=dHQ3YVVvYkdaWUVqTmgwSXQyMjE2YlE6MQ#gid=0 Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 18, 2014 Author Report Share Posted January 18, 2014 form filled in when do i send it ? as iit is now sat 1126am local time scotland Quote Link to comment Share on other sites More sharing options...
Simon Posted January 19, 2014 Report Share Posted January 19, 2014 Once that form is filled in you can send whenever you wish. Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 31, 2014 Author Report Share Posted January 31, 2014 hi simon  the link display unit is posted, post office say eta 5 days Quote Link to comment Share on other sites More sharing options...
neil brown Posted February 10, 2014 Author Report Share Posted February 10, 2014 hi simon  has the display unit arrived yet ? Quote Link to comment Share on other sites More sharing options...
Simon Posted February 11, 2014 Report Share Posted February 11, 2014 At this point it does not look to be in the building, however I will check with servicing department tomorrow morning to be sure. Quote Link to comment Share on other sites More sharing options...
neil brown Posted February 11, 2014 Author Report Share Posted February 11, 2014 hi simon  here is the package i sent to you   Quote Link to comment Share on other sites More sharing options...
Simon Posted February 12, 2014 Report Share Posted February 12, 2014 It came through the door today Quote Link to comment Share on other sites More sharing options...
neil brown Posted February 12, 2014 Author Report Share Posted February 12, 2014 yeah..........  once you have a good look at it, can you email me on the address above in this thread whats the damage is and cost of repair pleae and your opinion if it is worth repairing  cheers neil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.