Jo LeForce Posted December 11, 2014 Report Share Posted December 11, 2014 I need to connect an Innovate LM-1 Lambda kit to my G4+ storm to incorporate AFR reading into the ECU data log. Please list the steps I need to perform in terms of wiring & software configuration. Quote Link to comment Share on other sites More sharing options...
Simon Posted December 12, 2014 Report Share Posted December 12, 2014 LM-1 will need to be wired to a free AN volt input Input will need to be set as Lambda 1 Scaling will need to be correctly selected. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted December 12, 2014 Report Share Posted December 12, 2014 If you look at page 13 of the LM1 manual, it explains how to modify the linear analogue outputs to what ever you so desire. You can then select the calibration to a cal channel. Set up a cal channel to input the values you programmed your LM1 to output . I would use cal 4-6 as they are intended for linear voltage inputs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.