V5.4 Temp sensors CAL tables changed?

[dmacnz]

Question on the V5.4 firmware.

Ever since updating to 5.4 my car seems to indicate running hot. I have checked the fan setting and they are still working fine. Have done everything to sort out this problem. Curious if any of the stock 'cal tables" for the generic sensors were modified with this update. 
The car is a Subaru wrx V2. using the latest firmware on a g4+

Thanks

 

 

[Dave Kriedeman]

Hi dmacnz,

can you take a screen shot of your analogue temp  inputs, depending on your sensors, you may or may not need to turn on internal pullup resistors to get the correct readings.

These changes were made to allow for a far wider range of stock OEM sensors to be used.

Regards

Dave.

[mapper]

Hi Simon 

Can you elaborate this, please. For what OHM range should a 10kohm resp. 1kohm pull-up be used? 

[Simon]

Too keep it the same as old the 1K pullup is the one to go for.