Dinn Posted February 20, 2016 Report Share Posted February 20, 2016 (edited) Hi there,After upgrading to a new 5.5.6 firmware, the Slip Target Table disappeared from the setup menu after changing it to 3D table mode. The table only appear in 2D table mode.Thanks. Edited February 20, 2016 by Dinn Incomplete Quote Link to comment Share on other sites More sharing options...
Simon Posted February 21, 2016 Report Share Posted February 21, 2016 HI Dinn are you able to attach you map or email it through for us to check on the bench. Quote Link to comment Share on other sites More sharing options...
Scott Posted February 22, 2016 Report Share Posted February 22, 2016 After upgrading to a new 5.5.6 firmware, the Slip Target Table disappeared from the setup menu after changing it to 3D table mode. The table only appear in 2D table mode. Make sure your ECU is online when setting this up. I just tested this and when setting it up offline I could not see the 3D table either. Quote Link to comment Share on other sites More sharing options...
mapper Posted February 22, 2016 Report Share Posted February 22, 2016 I found that problem also on other tables. For example if you set Launch table to 3D, while offline. Beside the other things, great work! Really excited to have more Logging Channels and 3D target Slip map. Can set now Target Slip vs G-force with the Thunder :-) And just found on the last Impreza, that a 2D Target table could be to less. Required steps change alot with running time (when valve warms up). Quote Link to comment Share on other sites More sharing options...
Dinn Posted March 9, 2016 Author Report Share Posted March 9, 2016 Hi everyone's,Problem solved, as scot mentioned need to online with the ecu. Sorry guys, my mistake.After using the 3D table for the traction control the car runs very smoothly, i am using Target slip vs Gear since i don't have a G sensor. Just gain from non driven wheel acceleration log.Thanks again guys. Quote Link to comment Share on other sites More sharing options...
Scott Posted March 9, 2016 Report Share Posted March 9, 2016 Hi Dinn,Good to hear you have it working well now. We have released PCLink 5.5.7 which has the offline 3D slip table working. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.