HEMI Posted April 11, 2016 Report Share Posted April 11, 2016 (edited) Hello! I need help with sti plugin ecu. Link is dead, no power, no power main relay. no power nothing. OEM ecu works normally. Car is 2006 wrx sti and ecu WRXLink (07) - #WRX107+ Edited May 3, 2016 by HEMI Quote Link to comment Share on other sites More sharing options...
Scott Posted April 12, 2016 Report Share Posted April 12, 2016 (edited) There are a couple of possibilities. The most likely is that the ECU is not powering up. When powered up there should be an LED on on the top board of the ECU.The first thing to try is putting the jumpers on the bottom board of the ECU is the different positions:The next thing to check is that you have the correct WRX V10 ECU, as there are two versions, and the year guidelines are not always correct: Edited April 12, 2016 by Scott Quote Link to comment Share on other sites More sharing options...
Simon Posted April 12, 2016 Report Share Posted April 12, 2016 (edited) Note on the jumpers there is no harm in trying them in the alternative position. As it is possible that a 2007 year car might need the jumpers in the 2006 position or vice versa. Edited April 12, 2016 by Simon Quote Link to comment Share on other sites More sharing options...
HEMI Posted May 3, 2016 Author Report Share Posted May 3, 2016 Now ecu works, im chance jumper to 07 mode but next problem is A/C. When I press the button to the bottom of the air conditioning so nothing happens. All the wires coming from the right place. (AC clutch and AC request). Help me! Car is 2006 wrx sti and automatic A/C system Quote Link to comment Share on other sites More sharing options...
Simon Posted May 3, 2016 Report Share Posted May 3, 2016 Check the input to the ECU pin is changing with the button press.We need to know if it is at say 12Volts while AC button is off and the goes to 0Volts when on.It could also be the opposite way around.Once we get the request working the next step is making sure the output functions. Quote Link to comment Share on other sites More sharing options...
Scott Posted May 4, 2016 Report Share Posted May 4, 2016 Just adding to what Simon said, you can find the 'AC Request' status under the General tab of the Runtime Value window (F12 key to open). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.