Anthony Parle Posted September 13, 2016 Report Share Posted September 13, 2016 I am logging the AFR in the ECU and as suggested I chose AFR Average because I am still using the 14.77 setting on the LC2 Innovate sensors my issues is the number showing in the log is way off because I also have a Race Tech logger and it read correct. Is there anyway I can log the AFR in the ECu by the old scale 14.77 Tony Logs Day head gasket Blew Wakefield.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 14, 2016 Report Share Posted September 14, 2016 Did you try changing this setting:Otherwise you could offset the Analog input calibration a little. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted September 14, 2016 Report Share Posted September 14, 2016 What motor is this?Is there a specific reason you are logging AFR Average?I would honestly be logging Lambda 1 and Lambda 2. Quote Link to comment Share on other sites More sharing options...
Anthony Parle Posted September 14, 2016 Author Report Share Posted September 14, 2016 Hi Adam,yes I changed it. did you look at the gear change its still dropping to Zero so I will increase that number again.I will see if I have time between now and Saturday to change it over to Lambda as I agree its time to Get with the Program as they say. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.