Jump to content

Link G4 xtreme red no sensors reading on the B connector


MickeySteffo
 Share

Recommended Posts

I cant seem to get any sensor to read consistently on the B connector, when i power the ecu it will read the sensor for a second then stop and say the input is at 5V.

The same sensor will work fine in the A connector.

Another thing i noticed is that the AN Temp 3 and 4 are flickering a value even tho they are turned off

Is it a sensor ground issue? or something else?

Thanks.

Link to comment
Share on other sites

See pic below where to find the fault settings.  Set the error high to 5.00 and error low to 0.00V that will disable the fault settings so they wont interfere with your testing.  Once you are happy that the inputs are all working correctly then you can go back and put sensible fail safe values as fault settings for any critical sensors.

be792NV.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...