evolve Posted August 31, 2017 Report Share Posted August 31, 2017 Hello allI just finished wiring of an Extreme ECU on a MX5 NC 1.8. (Swapped 2.5 but same trigger)I cant find a trigger setup to work on this engine. Wiring is okI join a picture of the oem setup. Wich trigger should i use on this ? Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted August 31, 2017 Report Share Posted August 31, 2017 That's a 36-2-2-2.That's very similar to the Subaru ver7-10 or Suzuki baleno.I would start with the Suzuki baleno mode.What does the cam trigger look like? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 31, 2017 Report Share Posted August 31, 2017 The Mazda 3 mode would be my first pick. This runs the same crank pattern with 6 teeth on the cam Quote Link to comment Share on other sites More sharing options...
blaine@carmenaperformance Posted September 2, 2017 Report Share Posted September 2, 2017 I can confirm the Mazda 3 trigger works. Used this last week on an NC engine. Blaine CarmenaCarmena Performance TechDave 1 Quote Link to comment Share on other sites More sharing options...
evolve Posted September 2, 2017 Author Report Share Posted September 2, 2017 Thank you Will try thatCam sensor is 6 teeth uneven Quote Link to comment Share on other sites More sharing options...
evolve Posted September 9, 2017 Author Report Share Posted September 9, 2017 It works using Mazda 3 setup. Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.