chemat Posted September 24, 2017 Report Share Posted September 24, 2017 hi im newbies here.Just got link atom ..can anyone show how to make a gp limit as lonch control vs speed input Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 25, 2017 Report Share Posted September 25, 2017 I can help guide you here although the Atom can be a bit limited in this respect. What would you ideally like to do? Limit RPM purely based on wheel speed, or do you have something else to consider for launch control like a clutch switch? Are you trying to build boost or just limit wheel slip? Quote Link to comment Share on other sites More sharing options...
chemat Posted September 26, 2017 Author Report Share Posted September 26, 2017 yes im trying to build boost .and the launch criteria can be adjust with 4d ignition and 4d fuel table. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 26, 2017 Report Share Posted September 26, 2017 Ok, you still didnt tell me much about your setup and what you want to do but hopefully this example will give you some ideas... So in this example I have set up a virtual aux to "switch on" when wheel speed is less than 10KMH. I have assigned this virtual aux to an axis in a GP Limit table, this will give us a 6000RPM limit when the Virtual aux is on and a 10000RPM limit when the VA is off.I have then set up 4D fuel and ignition tables that are activated by this same VA. Whenever wheel speed is <10KMH, the 4D fuel will add 10% fuel and the 4D ign will retard ign 20degs. chemat 1 Quote Link to comment Share on other sites More sharing options...
chemat Posted September 26, 2017 Author Report Share Posted September 26, 2017 tq for the reply.as we now atom only have 2 digital input.which wire need to connect to the speed input to enable this fuction. the rest of your example i can i understand tq. Quote Link to comment Share on other sites More sharing options...
Simon Posted September 26, 2017 Report Share Posted September 26, 2017 Either Digital can be wired to a speed input and then to match the example above would be assigned as LF wheel speed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.