neil brown Posted December 7, 2017 Report Share Posted December 7, 2017 my current top mount intercooler has the sensor between core and throttle body got new intercooler to fit along with new ait sensor do i fit the new ait sensor between core and throttle body again as have seen the ait sensor fitted on the induction hose to the turbo ta neil Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 7, 2017 Report Share Posted December 7, 2017 Its job is to determine the temp of the air entering the cylinder, so in thoery, the closer to the port the better. But it is often difficult to mount it there so more commonly somewhere near the throttle body. Definitely not on the induction side - that would only work on an engine using MAF. Quote Link to comment Share on other sites More sharing options...
neil brown Posted December 8, 2017 Author Report Share Posted December 8, 2017 Thanks Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.