NathanFreke Posted March 17, 2018 Report Share Posted March 17, 2018 I spoke with one of the tech team last year about having one of the high frequency channels assigned for turbo speed as the speed sensor I’m using is too much for the regular DI channels. Is there a way to make this happen - would be a good thing to be able to use and sure I’m not the only one with this issue. Thank you in advance! Quote Link to comment Share on other sites More sharing options...
boostDR Posted March 17, 2018 Report Share Posted March 17, 2018 There is a speed sensor to analogue 0-5v output module available that people have used with the Borg Warner EFR turbo speed sensors. https://www.dccdpro.com/tsspro-turbo-speed-scaler/ Matt Quote Link to comment Share on other sites More sharing options...
Petter Posted June 18, 2018 Report Share Posted June 18, 2018 I ended up whit using a decade counter to scale down the frequency for my bw tss. https://www.amazon.com/Texas-Instruments-CD4017BE-Counter-Decoded/dp/B01GMYPSWM Works like a charm.... Quote Link to comment Share on other sites More sharing options...
whiteradam Posted June 18, 2018 Report Share Posted June 18, 2018 Allegedly they will have this fixed in some firmware update. Someday. Quote Link to comment Share on other sites More sharing options...
Mohamed ayed Posted January 30, 2022 Report Share Posted January 30, 2022 On 6/18/2018 at 8:02 PM, Petter said: I ended up whit using a decade counter to scale down the frequency for my bw tss. https://www.amazon.com/Texas-Instruments-CD4017BE-Counter-Decoded/dp/B01GMYPSWM Works like a charm.... How do you connect this could you share a diagram ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 31, 2022 Report Share Posted January 31, 2022 6 hours ago, Mohamed ayed said: How do you connect this could you share a diagram ? What ECU do you have? Quote Link to comment Share on other sites More sharing options...
Mohamed ayed Posted January 31, 2022 Report Share Posted January 31, 2022 8 hours ago, Adamw said: What ECU do you have? Evo 7 pnp g4+ @Adamw i just want to know is there any difference between this one and 4027 which you attached the diagram to ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 31, 2022 Report Share Posted January 31, 2022 Note I have normally suggested 4024 which has a divide by 2,4,8,16 etc output. The 4017 will only divide by 10. Either would work, I have usually used divide by 8 for turbo speed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.