Matt Dunn Posted June 5, 2018 Report Share Posted June 5, 2018 I have an AIM dash and have had it running on my Blue Storm G4+ fine. I have upgraded to an Extreme Black and copied the program across and it all works fine.. What I want to add is ethanol % on the dash as a display. The Dash is an older MXL, not the current MXS. In the dash there is not a channel for Ethanol %, however there are things in there that I dont use. Is it going to be possible to make it work? I have had a look through some of the can stuff but it it a bit over my level. Just would like to know if it is going to be possible ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 5, 2018 Report Share Posted June 5, 2018 There is the "Secondary injector DC" that is already scaled for 0-100% in the AIM, so we can instead send ethanol % in its position from the link end, at the AIM end all you will need to do is rename that channel. You can email me your ECU and Dash configs and I will make the change for you or I can give a brief "how to" on here if you like. Quote Link to comment Share on other sites More sharing options...
Matt Dunn Posted June 5, 2018 Author Report Share Posted June 5, 2018 Ok. I can see the "secondary injector DC" in the aim and think I can figure out the AiM end. If you give me a brief how to on here, and if I cant figure it out, I will email the file to you. I am still in the process of working out what sensors etc I will run to what input etc, so the map is not complete yet. Quote Link to comment Share on other sites More sharing options...
Matt Dunn Posted June 25, 2018 Author Report Share Posted June 25, 2018 I have been trying to figure it out but have not had success yet getting it to read Ethanol %. I emailed you a copy of my ECU program to have a look at. If you can have a look and make some changes or suggestions would be appreciated. Thanks Matt Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 25, 2018 Report Share Posted June 25, 2018 Sorry, I just found I had deleted/archived your email, I just made a change to your file and emailed it back. The AIM channel that was originally "secondary injector DC" should now display % eth with a bit of luck. Quote Link to comment Share on other sites More sharing options...
Matt Dunn Posted July 26, 2018 Author Report Share Posted July 26, 2018 Thanks. I have loaded the file and have it working and reading ethanol fine on the dash now. I have also been able to set some alarms in the dash for low/high ethanol content if it gets to far away from 30% Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.