Jump to content

Wrx v5 pnp 5 volt output


Recommended Posts

4 minutes ago, nwt1976 said:

Im installing pressure sensors using expansion connector but having problems with 5 volt output. Possible short circuit?

How many sensors can you run off one 5V output pin?

Its either 4 or 500mA from memory so you will have a hard time overloading it.  Most common pressure sensors are about 10mA, so should have enough juice to power at least 30.

So most likely a short.  You can view the 5V output on the runtimes screen, so you can watch that while pluging in various sensors to find where the problem is. 



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...