Rob W Posted September 15, 2018 Report Share Posted September 15, 2018 To do a COP conversion on a '99 wrx do I use the Aux Output Ignition Drives? 1&2 are currently ignition. 3&4 are engine fans. Would I change 3&4 to ignition drives and reallocate the fans to 5&6 and would the fans then work? Can I then change from wasted to direct spark? Where would the signals to the coils be wired to? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 15, 2018 Report Share Posted September 15, 2018 This would be a WRX6+ ecu I assume? There is no ign 5 or 6 available on that ecu so it would be easiest to move the fans to ign 7&8 that are on the expansion connector. Coils need to be wired ti ign 1,2,3,4. Quote Link to comment Share on other sites More sharing options...
neil brown Posted September 15, 2018 Report Share Posted September 15, 2018 Or goto www.jti.uk.com and order a cop loom for your year of car direct plug and play from factory coil pack plug Quote Link to comment Share on other sites More sharing options...
Rob W Posted September 15, 2018 Author Report Share Posted September 15, 2018 Thanks Guys, Yeah v5-6 wrx as per my profile there. Serial number 26067. Ignition 5 and 6 are listed in the Aux outputs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.