PhilS Posted October 7, 2018 Report Share Posted October 7, 2018 Hi all. I've attached the pinouts for the v1 impreza however I don't understand which ones they are? Or is there another wire I can use? I'm after adding another digital input to have two boost levels low/high. I understand the digital inputs will be a switch to ground / isolate that input. If anyone can help. The car has no ac. Regards Phil Quote Link to comment Share on other sites More sharing options...
Simon Posted October 7, 2018 Report Share Posted October 7, 2018 If you head to the menu above for Pin Functions Image attached. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 8, 2018 Report Share Posted October 8, 2018 I just noticed there is a mistake in the pin functions list above. Fixed version below. So DI2, 5 or 6 will probably be the easiest options. Quote Link to comment Share on other sites More sharing options...
PhilS Posted October 8, 2018 Author Report Share Posted October 8, 2018 Thanks for this. I presume I just cut the part if the loom that goes to the relevant pin and stick a switch with earth on one side, so it's either grounded or not. Sorry I'm fairly new to this. Got my head round mapping the car etc. Just struggling with additional features. Regards Quote Link to comment Share on other sites More sharing options...
Simon Posted October 8, 2018 Report Share Posted October 8, 2018 Yep that would do the trick or you can also use a 12Volt in as well just the configuration of the Di will change to suit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.