Jump to content

350z dual wideband


skeruno
 Share

Recommended Posts

Hi there!

 

Is there a way to feed 2 wideband signals into the 350ZLINK? Currently i use the expansion loom for 1 5 volt input (AN volt 8). But i see on the wideband controller(Innovate DLG-1) that the banks differ a lot. I see the software on the ecu supports it but i see no other 5 volt input. You guy's have any idea?

 

Kind regards,

 

Vincent

Link to comment
Share on other sites

You can repurpose a couple of inputs on the main header.  Here's a few that probably arent being used:

  • AN Volt 3, Pin 51, was originally for the MAF
  • AN Volt 10, Pin 35, was originally for the RF narrowband oxy.
  • AN Volt 11, Pin 16, was originally for the LF narrowband oxy.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...